These high-capacity line cards are designed to remove bandwidth bottlenecks in the network that are caused by a large increase in video-on-demand VoDIPTV, point-to-point video, Internet video, and cloud services traffic, all with an incredibly low power profile.
Fully populating an ASR chassis with the port line card delivers ports of 10 Gigabit Ethernet or ports of 1 Gigabit Ethernet in a single chassis. Such configurations are ideal for networks in which density, performance, and low-latency operations are critical. The port and the port line cards are designed for throughput of G and G, respectively, but can operate in oversubscription mode up to G for the port card and G for the port card.
There will be a graceful redistribution of packets across all ports in case of oversubscription. All the ports on the line card can be configured to be all in 10G or all in 1G mode. The line card also offers the flexibility to support certain mixed 1G and 10G configurations. These versatile capabilities help operators qualify and stock one type of line card that can be deployed in any combination of Layer 2, Layer 3, DCI, or aggregation applications, thereby reducing capital expenditures CapEx and operating expenses OpExas well as reducing the time required to develop and deploy new services.
Specific feature and scale support is hardware and software dependent. Table 1. Interface Support. Scalable and Integrated Multiservice Support. Layer 2 and Layer 3 services. Only LAN mode is supported. Evolutionary Monitoring. Carrier-class operations, administration, and maintenance OAM. Carrier-Class OS.
Modular, patchable, scalable, highly available, carrier-core, and edge-proven operating system. Table 2. Product Specifications. Chassis compatibility. Port density. Each line card is available as either a service edge—optimized enhanced QoS or packet transport—optimized basic QoS line card. Reliability and availability. Line-card online insertion and removal OIR support without system effects. Operating temperature. Operating humidity nominal relative humidity. Storage temperature.
Storage relative humidity. Note: Not to exceed 0.These high-capacity line cards are designed to remove bandwidth bottlenecks in the network today that are caused by a large increase in video-on-demand VoDIPTV, point-to-point video, Internet video, and cloud services traffic.
No hardware upgrade to the chassis or cooling system is required. Total bandwidth is dependent on the number and type of RSPs installed. Each line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications, thereby reducing capital expenditures CapEx and operating expenses OpExas well as reducing the time required to develop and deploy new services.
The Cisco ASR Series Ethernet line cards set a new standard for Layer 2 and Layer 3 service density and scale, allowing operators to offer predictable, managed transport services while optimizing the use of network assets. Recognizing that real-time media dominate next-generation services, Cisco has integrated media-monitoring technology into the Cisco ASR Series Ethernet line cards.
Addressing the advantages of consolidating IP with the transport network, G. The Advanced FEC extends transmission-layer performance, delivering extended performance over an amplified system without the cost of regeneration or transponders. Specific feature and scale support is hardware and software dependent. Table 1. Interface Support. Provide the capability to mix and matchGigabit Ethernet interface types across a single line card.
Standard G. Scalable and Integrated Multiservice Support. Layer 2 and Layer 3 services. Evolutionary Monitoring. Video monitoring VidMon. Provides real-time monitoring of video flows, including issuance of an alarm upon degradation. Carrier-Grade OS. Modular, patchable, restartable, scalable, highly available, carrier-core and edge-proven operating system.
T-Class Synchronization. Synchronous Ethernet. IEEE Cisco ASR support of the IEEE protocol, providing the capability to distribute precision time and frequency across the network. Table 2. Product Specifications. Chassis compatibility. Port density. Reliability and availability.
Line card online insertion and removal OIR support without system impact. Operating temperature nominal. Operating temperature short-term.We are facing issue with ASR line card. After power on line card status led is amber only and showing below error. We were upgrading from 6.Ansys static structural problems
After that this issue started. I choose boot from previous boot and it worked, after i upgraded to 6. But line card was not booting.
Since you have 6. Buy or Renew. Find A Community. Cisco Community. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. All Community This category This board. Showing Error "IPU secure boot failed". Part Number : Top Assy.
I have this problem too. All forum topics Previous Topic Next Topic. Cisco Employee.Piraeus port authority
What version of code were you running before? Were the FPDs up to date on the old code? Did you do fpd auto-upgrade when upgrading to 6.
ASR 9000 シリーズ ライン カード タイプ
Was this card working in old code but not working now or is it newly inserted card? In response to smilstea. Its factory fit card. It was working before. In response to hellopavil1. From admin mode run the below command. Can you also try this? Thanks, Sam. I believe only Cisco employees can see It. Not yet open for others. Please see the attached image.
Preview file. I'll have to work on making it visible. For now here are the release notes. Yongyu Jia.The last day to order the affected product s is May 11, Table 1 describes the end-of-life milestones, definitions, and dates for the affected product s. Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Announcement Date. The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.
May 11, The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. Actual ship date is dependent on lead time. August 10, The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
May 10, The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.
The last date to extend or renew a service contract for the product. August 9, Last Date of Support: HW. The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. May 31, Table 2. See the Product Migration Options section below for detailed information on replacing this product.
There is currently no replacement product available for this product.Large 10 Gigabit Ethernet link aggregation bundles can now be replaced by a single Gigabit Ethernet port to simplify network designs. No hardware upgrade to the chassis or cooling system is required.
Total bandwidth is dependent on the number and type of RSPs installed. Each line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications, thereby reducing capital expenditures CapEx and operating expenses OpExas well as reducing the time required to develop and deploy new services.
The Cisco ASR Series 2-Port Gigabit Ethernet line cards provide significant for Layer 2 and Layer 3 service density and scale, allowing operators to offer predictable, managed transport services while optimizing the use of network assets. Distances of up to km can be achieved while using the optical protection capabilities of the DWDM network.
Specific feature and scale support is hardware and software dependent. Table 1. Interface Support. Provide the capacity to mix and match Gigabit Ethernet interface types across a single line card. Scalable and Integrated Multiservice Support. Layer 2 and Layer 3 services.Karabiner 98k
Evolutionary Monitoring. Video monitoring VidMon.Portal spells real
Provides real-time monitoring of video flows, including issuance of an alarm upon degradation. Carrier-Class OS. Modular, patchable, restartable, scalable, highly available, carrier-core and edge-proven operating system. T-Class Synchronization. Synchronous Ethernet.
IEEE Table 2. Product Specifications. Chassis compatibility. Port density. Reliability and availability. Line card online insertion and removal OIR support without affecting the system.
Operating temperature nominal. Operating temperature short-term. Note: Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year total of hours in any given year, but no more than 15 occurrences during that 1-year period. Operating humidity nominal relative humidity. Storage temperature. Storage relative humidity. Note: Not to exceed 0.On the surface this would make sense. Nadal is the King of Clay and has won this very tournament a record-breaking eight times.
What the bookmakers had overlooked was that Fognini had beaten Nadal on clay only a few months earlier in Rio De Janeiro. There is a big emphasis on brand loyalty in the betting business.
Cisco ASR 9000 Series 24-Port and 48-Port Dual-Rate 10GE/1GE Line Card Data Sheet
Because it's such a competitive sector, companies will try and lure you to bet with them and only them. Whether this is through various loyalty schemes or special in-shop offers, the intention is the same. Don't let them make you think you shouldn't shop around. Check the offers available for specific bets. The first goalscorer market is one of the most popular bets in football and as a result, bookies all have their own spin on it.
Betfred will double the odds if your player scores twice and treble the odds if he scores a third time.Opening Cisco ISR Router C1113-8PLTELA
Ladbrokes, on the other hand, will double the odds if he scores within 25 minutes and you will probably find that most other bookies have their own version to try and get you through their doors instead of someone else's. Your research should tell you which of these offers will most suit you for any given match. Be flexible and be prepared to put in the leg work. This is something that, even though it seems like common sense, punters forget all the time.
The fewer selections you include in your bet, the more chance you stand of winning. If you're betting to make money think small, not big. One team or selection if you can stake enough.
Three or four maximum. Once you find yourself putting that 20-fold accumulator on, you really are on cloud cuckoo land. Bookies lose most of their money from singles. But trebles usually offer a decent return if you really do want a higher payout. If you do find yourself desperately wanting that long-shot bet on a Saturday afternoon, do not pad out your accumulator with odds-on selections. You're decreasing your chance of winning for next to no extra cash.
This is really easy to do in tennis. It's the opening week of a Grand Slam and you see the top players are all drawn against relative unknowns. It would seem like a great idea to lump them altogether in a multiple to try and win some easy money. But this would be a mistake.
It would make more sense to do some research and find an up-and-coming player who has a favourable draw and back them at a better price. Again, once you've done enough research, you should know you're sport well enough to find better value in the hundreds of other markets the bookies offer.
It is arguably a way for the bookies just to provide you with more ways to lose but you can find the good prices if you look hard enough.
They're higher than them in the league but does that mean they're a stronger team. That's for the football pages to discuss. But just a minimal amount of research shows that Jamie Vardy is the league's top scorer.
So betting on him to score anytime is as safe as bets come. While we're on the subject of the less obvious markets, if you do pick an obscure one, make sure to check the terms with the betting shop staff. If you back your team to win both halves, you are betting on them to win the first half and the second half separately.The topic model goes through a number of states until its fully completed.
Through the status field in the topic model you can determine when the topic model has been fully processed and ready to be used to create predictions. Thus when retrieving a topicmodel, it's possible to specify that only a subset of fields be retrieved, by using any combination of the following parameters in the query string (unrecognized parameters are ignored): Fields Filter Parameters Parameter TypeDescription fields optional Comma-separated list A comma-separated list of field IDs to retrieve.
To update a topic model, you need to PUT an object containing the fields that you want to update to the topic model' s base URL. Once you delete a topic model, it is permanently deleted. If you try to delete a topic model a second time, or a topic model that does not exist, you will receive a "404 not found" response. However, if you try to delete a topic model that is being used at the moment, then BigML. To list all the topic models, you can use the topicmodel base URL.
By default, only the 20 most recent topic models will be returned. You can get your list of topic models directly in your browser using your own username and API key with the following links. You can also paginate, filter, and order your topic models.
Cisco ASR 9000 Series 2-Port 100 Gigabit Ethernet Line Cards Data Sheet
Time Series Last Updated: Friday, 2017-10-27 12:23 A time series model is a supervised learning method to forecast the future values of a field based on its previously observed values. It is used to analyze time based data when historical patterns can explain the future behavior such as stock prices, sales forecasting, website traffic, production and inventory analysis, weather forecasting, etc.
A time series model needs to be trained with time series data, i.
BigML implements exponential smoothing to train time series models. Time series data is modeled as a level component and it can optionally include a trend (damped or not damped) and a seasonality components as explained below:Forecast equation Level equation Forecast equation Level equation Trend equation Forecast equation Level equation Damped trend equation Forecast equation Level equation Trend equation Seasonality equation The different components can have variations, e.
As a result of combining the different variations for each component, several models can be trained for a given objective field. Note that BigML excludes certain combinations for numerical stability reasons such as additive errors with multiplicative trends or multiplicative error and trend with additive seasonality. BigML computes four different performance measures to select the best model for a given objective field. You can create a time series model selecting one or several fields from your dataset to use as objective fields to forecast their future values.
You can also list all of your time series. This can be used to change the names of the fields in the time series with respect to the original names in the dataset or to tell BigML that certain fields should be preferred. Example: 100 name optional String,default is dataset's name The name you want to give to the new time series.
The type of the field must be numerical. Non-numeric fields will be ignored, and if not present, the right-most valid field in the dataset will be used.
The period needs to be set taking into account the time interval of your instances and the seasonal frequency. For example, for monthly data and annual seasonality, the period should be 12, for daily data and weekly seasonality, the period should be 7. It can take values from 0 to 60. If the period is set to 1, there is no seasonality. If the period is 0, or not given, BigML will automatically learn the period in your data. The range of successive instances to build the time series.
Multiplicative seasonality models are only available when the objective field has strictly positive values (greater than 0).
- Priority queue struct in c
- Risk assessment for curtain wall installation
- Whistle to midi
- Cenovnik veterinarskih lekova
- Cisco sg350 dhcp configuration
- Greenhouse sensors
- Kanchana 2
- Open mpi c++
- Bootstrap 4 starter template
- Kiran digest 1979
- Theme changer chrome
- Photocopier maintenance checklist
- Kawneer spring loaded astragal
- Crowdstrike response scripts
- Thor 5e stats
- Future of onenote